消防相關法令及其他要求改變時
5.2.2.2 find the abnormality in inspecting of the plant area.
廠區巡檢發現異常時
5.2.2.3 the change of the area regulation of the plant
廠內區域規劃配置改變
5.2.2.4 the increase of the fire risk after the area use
區域用途改變後火災風險增加
5.2.2.5 the increase of the dosage of the flammable chemical
易燃化學品用量增加時
| SUBJECT：主題 | DOC. NO. | SOP-PEHS-006 |
FIRE FIGHTING SAFE SYSTEM MANAGEMENT 消防安全系統管理程序 | PAGE NO. | OF |
VERSION | |
DATE | |
5.2.2.6 analyze the accident or drilling of meeting an emergency
事故或應變演練檢討時
5.2.2.7 the insurance company and the organ in charge
保險公司或主管機關要求時
5.2.2.8 the appointment of the safety and environment representative
其他經安環管理代表指定者
5.3 the solution of after the analysis about the fire fighting and safety apparatus 消防設備安全檢討處置
5.3.1 if there is a need to increase the fire fighting and safety apparatus after the analysis, the stocking should be done from the eligible purveying manufacturer according to the relative regulation.
檢討結果有增加消防安全設備需求時，須依規定尋找合格供應廠商後，依採購相關規定進行採購。
5.3.2 if the new increasing fire fighting and safety apparatus are stocked for the first time by the factory, the factory service unit will evaluate the risk and plan the control of the insufferable risk according to the regulation of the “career safety and sanitation distinguishability and risk evaluation procedure book”.
如新增之消防安全設備為公司第一次採購時，由廠務單位依「職安衛危害鑑別與
風險評估作業程序書」規定進行風險評估與不可忍受風險控制規劃作業。
5.4 check, maintenance, and handle 檢查、維護與運用
5.4.1 the report of the check and maintenance should hand over to the eligible manufacturer of the fire fighting apparatus.
定期檢修申報作業須委託合格之消防設備商辦理。
5.4.2 to maintenance, check, and test in date.
定期保養、檢查、測試作業：
5.4.2.1the factory unit should maintain in date of the fire fighting and safety apparatus
廠務單位依規定進行消防安全設備之定期保養。
5.4.2.2 carry out the check of the fire fighting apparatus including the test
of the function and the capability; the factory service division will
make the relative regulation.
實施消防設備之檢查應包含功能及性能的測試，相關操作標準由廠務部訂定。
5.4.3 inspection in date定期巡檢
5.4.3.1the fire-fighting apparatus should be checked in date according to the
| SUBJECT：主題 | DOC. NO. | SOP-PEHS-006 |
FIRE FIGHTING SAFE SYSTEM MANAGEMENT 消防安全系統管理程序 | PAGE NO. | OF |
VERSION | |
DATE | |
regulations, if necessary, should be repaired and improved in the regulated time.
消防設備之檢查實施依規定實施定期檢查，如有異常必要時，須在規定時間內進行維修及改善。
5.4.3.2the important regulations are as the following:
巡檢之重要規範說明如下：
（1） The place of the fire fighting apparatus posited in each area should not change without the permission of the people of the factory service and safety and environment.
各區域所設置的消防設備位置，非經廠務或安環人員許可不得擅自變更
（2） Do not enter the fire fighting apparatus area and operate without the permission of the people of the factory service and safety and environment.消防設備區域非經廠務或安環人員許可不得進入及操作
（3） Forbidden to place the flammable things and the other none-relative equipment in the area of the fire fighting apparatus
消防設備區域內嚴禁放置易燃物品及其他非相關設備
（4） Nothing can be placed before the equipment such as fire extinguisher, fire hydrant, etc.
滅火器、消防栓等區域前嚴禁任何物品阻檔其使用操作
（5） Nothing can be placed to hold the passage and the fire door.
嚴禁任何物品堆放阻檔通道及安全門的開啟
5.5 the drilling of meeting an emergency 應變演練運用
5.5.1 when each department carries out a drilling, they should notify the presumable situation of the using to the factory service and environment unit and also should help to recover the apparatus after the drilling
各單位實施緊急應變演練作業時，除將消防安全設備預計使用情形通知廠務及安環單位外，並負責於演練後將設備協助復原。
5.5.2 if some equipment needs makeup and repairing after the drilling, should notify the factory unit to finish the protection.
如果演練後有設備須要補充或維修時，應通知廠務單位完成維護作業。
5.6 management of the abnormality 異常處理
5.6.1in the checking of the fire fighting apparatus or if someone finds the fire fighting apparatus is abnormal, he should notify the factory unit to manage. The factory unit should record the situation of the abnormality and management, and turn in the automatic check result to the safety and the environment unit with the check result so as to invest and analyze the reason for the 5.2.
| SUBJECT：主題 | DOC. NO. | SOP-PEHS-006 |
FIRE FIGHTING SAFE SYSTEM MANAGEMENT 消防安全系統管理程序 | PAGE NO. | OF |
VERSION | |
DATE | |
實施消防設備於檢查時或人員發現消防設備有異常狀況時，應通知廠務單位前往處
理，廠務單位應將異常狀況及處理情形紀錄後，每月配合自動檢查結果通知安環管理單位。以利統計調查分析其原因，提供5.2分析使用。
5.6.2 if the factory unit can deal with the fire fighting apparatus, they should hand over to the outside manufacturer to help.
消防設備在廠務無法處理時得依規定委外廠商協助處理以恢復正常。
6.0 reference參考資料：
6.1 the choice of the supply agent and the management procedure (1000-0008)
供應商選擇暨管理程序書（1000-0008）
6.2 management procedure book of the stocking (1000-0009)
採購管理程序書（1000-0009）
6.3 career safety and sanitation distinguishability and risk evaluation procedure book
職安衛危害鑑別與風險評估作業程序書（文件編號）
6.4 documents control procedure（1010-0001）
文件管制程序書（1010-0001）
6.5 standard procedure of fire pump（5010-7010）
消防泵浦標準作業程序（5010-7010）
6.6 management of meeting an emergency of disasters and accident（6510-1010）
災害事故緊急應變管理方案（6510-1010）
7.0 forms 使用表單：
7.1 fire fighting apparatus maintenance record (attachment form one)
消防器材保養維修記錄表（附表一）
8.0 attachment附件
8.1 attachment two fire fighting safe system management process
附件二消防安全系統管理流程圖
微型消防站队员训练内容
消防安全管理台账
