7、耐压试验
        7. Pressure test
        耐压试验前，应确认需监检的项目均监检合格，受压企业应完成的各项工作均有见证。耐压试验时，监检人员必须亲临现场，检查试验装置、仪表及准备工作，确认试验结果。
        Before pressure test, confirm that all required items have passed the supervisory inspection and the supervised manufacturer has kept the testimony of the whole-completed work. During pressure test, the supervisory inspector shall check the test equipment, instruments, preparation work for testing and verify the test results on the site.
        8、安全附件
        8. Safety appurtenance
        检查安全附件数量、规格、型号及产品合格证应当符合要求。
        The number, specifications, types and certificates of compliance of safety appurtenances should meet the requirements.
        9、气密性试验
        9. Leak test
        检查气密性的试验结果，应当符合有关规范、标准及设计图样的要求。
        Check the leak test result to assure that it meets to the requirements of concerned code, standards, and design drawing.
        10、出厂技术资料
        10. Delivery technical data
        （1）审查出厂技术资料。
        Check the technical data to be delivered.
        （2）检查铭牌内容应符合有关规定，在铭牌上打监检钢印。
        Check the nameplate if the contents on it are in accordance with the relevant requirements, if so, stamp the supervisory inspection steel seal on the product's name plate.
        11、监检资料
        11. Supervisory inspection data
        经监检合格的产品，监检人员应当根据《压力容器产品安全性能监督检验项目表》的要求及时汇总、审核见证资料，并由监检单位出具《监检证书》。
        Once the product has passed the supervisory inspection, the supervisory inspector should summarize and verify the testifying paper in time according to the Supervisory Inspection Items for Safety Performance of Pressure Vessel Products and issue the Supervisory Inspection Certificate.
        五、监检程序
        Chapter 5 Supervisory Inspection Procedure
        1、受检企业资质、质量体系、人员资格及生产能力确认，内容包括：
        1. The certificate, quality management system, personnel qualification and production capability of the supervised manufacturer should be confirmed, which include:
        （1）、审查受检企业制造许可证，确认其有效性；
        (1) Examine the certificate of pressure vessel manufacturer; confirm the effectiveness of its qualification.
        （2）、审查受检企业的质量体系文件（包括质量手册、程序文件、管理制度、各责任人员的任免文件、质量信息反馈资料等）是否符合要求；
        (2) Review the Documents on quality system (including quality manual, procedures, management rules, documents on appointment and dismiss of responsible persons, and quality information feedback data), Confirm that the Documents on quality system meet the requirements of corresponding codes.
        （3）、审查从事锅炉压力容器焊接的持证焊工的持证项目、有效期等是否符合要求；
        (3) Check the qualified items, terms of validity of the qualified welders. The qualified items, terms of validity of the qualified welders engaged in the welding of pressure vessel products should meet the requirements of corresponding codes.
        （4）、审查从事锅炉压力容器质量检验的人员及从事无损检测人员的持证项目、级别、有效期等是否符合要求；
        (4) Check the qualified items, qualified level and terms of validity of the list of staff engaged in non-destructive examination and quality inspection. Their qualified items, qualified level and terms of validity should meet the requirements of corresponding codes.
        （5）、审查压力容器的设计资料，工艺文件，制造、检验控制程序，以及焊接工艺评定一览表等；
        (5) Review the pressure vessel design data, manufacture procedure documents, manufacture and inspection control procedure, as well as the list of welding procedure qualifications.
        （6）、查看并确认受检企业的生产能力。
        (6) Check and verify the production capability of the supervised manufacturer.
        2、按《监检项目表》（见附件）的内容实施监检工作。
        2. Supervisory inspection should be implemented according to the contents of Supervisory Inspection Items(Appendix 1).
        （1）、压力容器产品监检项目分A类和B类。对A类项目，监检员必须到场进行监检，并在受检企业提供的相应的见证文件（检验报告、记录表、卡等，下同）上签字确认；未经监检确认，不得流转至下一道工序。对B类项目，监检员应到场进行监检，如不能到场监检，可在受检企业自检后，对受检企业提供的相应见证文件进行审查并签字确认。
        (1) The Supervisory Inspection Items of pressure vessel products are classified into Category A and Category B.
        For the items of Category A, the supervisory inspector must conduct supervisory inspection on the site and should sign on the related testifying documents provided by the supervised manufacturer (including inspection report, recording forms and cards; similarly hereinafter). If the item has not been verified via supervisory inspection, the product cannot be transferred to the next working process.
        For the items of Category B, The supervisory inspector must conduct supervisory inspection on the site. If the supervisor inspection is not on the site, he(or she) should check and sign on the related testifying documents provided by the supervised manufacturer to validate the self-inspection of the manufacturer.
        （2）、受检单位企业发生质量体系运转和产品安全性能违反有关规定的一般问题时，监检员应当向受检企业发出《锅炉压力容器产品安全性能监督检验工作联络单》；发生违反有关规定的严重问题时，监检单位应当向受检企业签发《锅炉压力容器安全性能监督检验意见通知书》，并报告国家质检总局安全监察机构。
        (2) When the supervised manufacturer makes such general mistakes of the implementation of its quality system or the safety performance of its products against the related rules, the inspector should give out the Work Liaison Sheet of Safety Performance Supervisory Inspection of Boiler and Pressure Vessel Products to the supervised manufacturer. If the mistakes are serious, the supervisory inspection agency should give out the Notice on Safety Performance Supervisory Inspection of Boiler and Pressure Vessel Products to the supervised manufacturer. Besides, the supervisory inspection agency should report to Safety Supervision Department of General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China (AQSIQ).
        3、总体验收，出具报告：对产品进行总体验收。经监检合格的产品，监检人员根据《压力容器产品安全性能监督检验项目表》的要求及时汇总、审核见证资料，由监检单位出具《压力容器产品安全性能监督检验证书》，并在产品铭牌上打监检钢印。
        3. Combined Supervisory Inspection of the supervised products. Once the product has passed the supervisory inspection, the supervisory inspector should summarize and verify the testifying paper in time according to the Supervisory Inspection Items for Safety Performance of Pressure Vessel Products, issue the Supervisory Inspection Certificate, and stamp the supervisory inspection steel seal on each product's name plate.
       
        起草：衣粟             审核：                         批准：